Cisco Aironet 3800 Series Access Points Data Sheet
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco Certified Remanufactured Equipment for Networking
Upgrade at deeply discounted prices to help ensure secure network transformation.
The Cisco® Aironet® 3800 Series Wi-Fi access points are highly versatile and deliver the most functionality of any access points in the industry.
For organizations paving the way for the new 802.11ac Wave 2 standard, the Cisco Aironet 3800 Series is the perfect solution. The access points go beyond getting ready for the new standard, providing the ultimate in flexibility and versatility.
For large enterprise organizations that rely on Wi-Fi to engage with customers, the 3800 Series is a hands-off product that’s intelligent enough to make decisions based on end-device activities and usage. This automation allows you to devote time to other pressing matters, secure in the knowledge that your Wi-Fi network is performing to its utmost potential.
The Aironet 3800 Series is packed with the features and capabilities that have made Cisco the industry leader, at a price point that is ideal for managing wireless growth, capacity, and coverage gaps in dense indoor environments.
With the 3800 Series, you can secure remote workers or the micro-office. Any Cisco Aironet or Catalyst access point can function as an OfficeExtend Access Point (OEAP). With an OEAP, an employee at home or in a temporary micro-office will have access to the corporate SSID and the corporate network without the need to set up a VPN or have any advanced technical know-how.
Cisco User Defined Network, a feature available in Cisco DNA Center, allows IT to give end users control of their very own wireless network partition on a shared network. End users can then remotely and securely deploy their devices on this network. Perfect for university dormitories or extended hospital stays, Cisco User Defined Network grants both device security and control, allowing each user to choose who can connect to their network. (Available second half of calendar year 2020.)
The Wi-Fi 6 readiness dashboard is a new dashboard in the Assurance menu of Cisco DNA Center. It will look through the inventory of all devices on the network and verify device, software, and client compatibility with the new Wi-Fi 6 standard. After upgrading, advanced wireless analytics will indicate performance and capacity gains as a result of the Wi-Fi 6 deployment. This is an incredible tool that will help your team define where and how the wireless network should be upgraded. It will also give you insights into the access point distribution by protocol (802.11 ac/n/abg), wireless airtime efficiency by protocol, and granular performance metrics.
| Feature |
Benefit |
| 802.11ac Wave 2 support |
Provides a theoretical connection rate of up to 2.6 Gbps per radio—roughly double the rates offered by today’s high-end 802.11ac access points. |
| High-density experience |
Best-in-class RF architecture that provides high-performance coverage for a high density of client devices, giving the end user a seamless wireless experience. Features include custom hardware in 802.11ac Wave 2 radios, Cisco CleanAir®, Cisco Client Link 4.0, cross-access point noise reduction, and an optimized client roaming experience. |
| Multiuser Multiple-Input Multiple-Output (MU-MIMO) technology |
Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput. |
| Multigigabit Ethernet support |
Providing multiple gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100-Mbps and 1-Gbps speeds. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling. |
| Flexible Radio Assignment |
Allows the access points to intelligently determine the operating mode of serving radios based on the RF environment. The access points can operate in the following modes:
●
2.4-GHz and 5-GHz mode: One radio serves clients in 2.4-GHz mode, while the other serves clients in 5-GHz mode
●
Dual 5-GHz mode: Both radios inside the access point operate on the 5-GHz band, maximizing the benefits of 802.11ac Wave 2 and increasing client device capacity
●
Wireless Security Monitoring and 5-GHz mode: One radio serves 5-GHz clients while the other is scanning the full spectrum for attackers, RF interference, and rogue devices
|
| Dual 5-GHz radio support |
Enables both radios to operate in 5-GHz client serving mode, allowing an industry-leading 5.2 Gbps (2 x 2.6 Gbps) over-the-air speed while increasing client capacity. |
| Smart antenna connector |
An intelligent second physical antenna connector is included on 3800 Series models with an external antenna. This connector provides advanced network design flexibility for high-density and large open-area environments such as auditoriums, convention centers, libraries, cafeteria, and arenas/stadiums, allowing two sets of antennas to be connected and active on a single access point. |
| Modular architecture |
Second-generation modular architecture first introduced by the 3600 Series access points. New side-mount connection allows companies to add and remove modules as needed without having to dismount the access point from the ceiling, further simplifying the customer’s time and dollars when performing network upgrades. The new side-mount architecture allows for additional flexibility in the form factor of a 3800 Series module, and in the choice of solutions with integrated or even external antennas of their own. We have doubled the amount of power available to 3800 Series modules from 9W to 18W, broadening the potential module applications and solutions. |
| 160-MHz channel support |
Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the industry’s best-performing wireless network. |
| Zero-impact Application Visibility and Control* |
Uses dedicated hardware acceleration to improve the performance of line-speed applications such as Cisco Application Visibility and Control. |
| Cisco ClientLink 4.0 |
Cisco ClientLink 4.0 technology improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as smartphones and tablets. |
| Cisco CleanAir 160 MHz* |
Cisco CleanAir technology, enhanced with 160-MHz channel support, provides proactive, high-speed spectrum intelligence across 20-, 40-, 80-, and 160-MHz-wide channels to combat performance problems due to wireless interference. |
| Cross-access point noise reduction |
A Cisco innovation that enables access points to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance. |
| Optimized access point roaming |
Helps ensure that client devices associate with the access point in their coverage range that offers the fastest data rate available. |
| Automatic link aggregation (LAG) support |
802.3ad (Link Aggregation Control Protocol [LACP]) compliant, allowing both Ethernet interfaces to automatically enable LAG, increasing overall throughput to the access point. |
| Cisco Mobility Express |
Flexible deployment mode through the Cisco Mobility Express solution is ideal for high density environments and can support up to 100 access points. Easy setup allows the 3800 Series access points to be deployed on networks without a physical controller. |
| Apple features |
Apple and Cisco have responded to this challenge by partnering to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Specifically, using new features in iOS 10 in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications. At the center of the collaboration is a unique handshake between Cisco WLAN and Apple devices. This handshake enables Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. |
The Aironet 3800 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and high-performance laptops, providing a greater end-user experience. Whether your project involves wholesale changes to your current wireless network or upgrading your legacy Wi-Fi deployments (802.11a/b/g/n/ac Wave 1 deployments), the Aironet 3800 Series can handle the job.
The Aironet 3800 Series supports 802.11ac Wave 2, providing a theoretical connection rate of up to 5.2 Gbps—that’s roughly four times the rate offered by today’s high-end 802.11ac access points. The boost helps you stay ahead of the performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.
Pairing the 3800 Series access points with the Cisco Digital Network Architecture (Cisco DNA) allows for a total network transformation. Cisco DNA allows you to truly understand your network with real-time analytics, quickly detect and contain security threats, and easily provide networkwide consistency through automation and virtualization. By decoupling network functions from the hardware, you can build and manage your entire wired and wireless network from a single user interface.
Working together, the 3800 Series and Cisco DNA offer such features as:
● Flexible Radio Assignment
● Cisco Connected Mobile Experiences
● Cisco High Density Experience
● Fast Lane
● Cisco Identity Services Engine
● And much more
The result? Your network stays relevant, becomes digital-ready, and is the lifeblood of your organization.
Building on the Cisco Aironet heritage of RF excellence, the Cisco Aironet 3800 Series Access Points run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a
high-density experience for enterprise networks designed for mission-critical, high-performance applications. The 3800 Series is part of Cisco’s flagship portfolio of 802.11ac-enabled access points, delivering a robust mobility experience. It features 802.11ac Wave 2 with 4x4 MU-MIMO technology supporting three spatial streams. MU-MIMO enables access points to split spatial streams between client devices, to maximize throughput.
With two radios built into each access point, the Aironet 3800 Series is more versatile than any access point currently on the market. These radios are outfitted with Flexible Radio Assignment, which means that the access points automatically self-optimize to better serve the environment. For example, one of the radios broadcasts its signal on the 5-GHz channel and the other sends out a 2.4-GHz signal. The access point understands the wireless environment and will automatically switch the 2.4-GHz signal to a 5-GHz signal, increasing the reliability of your customers’ Wi-Fi use. This setting automatically works in reverse too: the access point can recognize that the RF environment has changed and revert back to its original configuration.
The 3800 Series also dynamically changes the radio settings based on the wireless environment. The access point will allow one of the radios to operate in Wireless Security Monitoring mode, allowing you to detect wireless security threats and interference and combat rogue access. This valuable information can be culled in an easy-to-understand matrix to inform you about your wireless users. Flexible Radio Assignment also allows you to convert a radio into Wireless Service Assurance mode, providing proactive health monitoring of the network.
● Optimized access point roaming helps ensure that client devices associate with the access point in their coverage range that offers the fastest data rate available
● Cisco ClientLink 4.0 improves downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11a/b/g/n/ac. At the same time, the technology improves battery life on mobile devices
● Cisco CleanAir is technology enhanced with 160-MHz channel support. It delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-, and 160-MHz-wide channels to combat performance problems due to wireless interference
● MIMO equalization capabilities optimize uplink performance and reliability by reducing the impact of signal fade
● Apple roaming features such as 802.11r Fast Transition, 802.11v BSS Transition, and Assisting Roaming enables Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices
The 3800 Series carries forward the modular architecture first introduced with the Aironet 3600 Series, providing unparalleled investment protection for forward-looking modular solutions. The 3800 Series delivers an enhanced second-generation modular architecture in the following ways:
● Moving the module connection from the bottom to the side of the access point. This allows for easier addition and removal of a module without having to dismount the access point and also allows for flexibility in module design with respect to size and appropriate antenna placement.
● Increasing the power available to a module to 18W, providing additional flexibility for future module solutions.
● The Cisco Aironet Developer Platform framework works in tandem with the Aironet 3800 Series as the perfect solution, allowing your network to work for you. Modularity brings intent-based networking to the edge, customizing your ability to tackle new use cases and emerging technology standards, so that your deployments are ready for the future. The Cisco Aironet Developer Platform program transforms the access point into a powerful development platform for mobility and IoT convergence.
● The Cisco Beacon Point Module is the virtual beacon solution that is leading the way in the indoor location-based services space. Cisco technology brings both easy deployment and superior location accuracy to the industry. All it takes to move a virtual beacon is a mouse click and technologies that can identify assets from 1 to 3 meters away. The Cisco Beacon Point Module is the perfect add-on to augment your Cisco Aironet 3800 Series Access Point and will strengthen your wireless network. This solution is well suited to industries such as retail (properly engage customers), healthcare (accurately track assets), and offices (optimize workspaces).
As wireless LAN continues to grow as the dominant method of connecting to private and public networks, the access point becomes a perfect integration point into an enterprise corporate network or carrier service network for a wide variety of solutions. Companies can use a single Ethernet cable drop from their wired network to provide high-speed network access and also typically for Power over Ethernet (PoE) to the access point and solutions that are integrated with and interconnected through the 3800 Series access points.
| Item |
Specification |
||||||
| Part numbers |
Cisco Aironet 3800i Access Point: Indoor environments, with internal antennas
● AIR-AP3802I-
x-K9: Dual-band, controller-based 802.11a/b/g/n/ac
● AIR-AP3802I-
xK910: Eco-pack (dual-band 802.11a/b/g/n/ac) 10 quantity access points
● AIR-AP3802I-D-K9I: Dual-band, controller-based 802.11a/b/g/n/ac (India only)
Cisco Aironet 3800i Access Point Configurable: Indoor environments, with internal antennas
● AIR-AP3802I-x-K9C: Dual-band, controller-based 802.11a/g/n/ac, configurable
● AIR-AP3802I-xK910C: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points, configurable
Cisco Aironet 3800e Access Point: Indoor, challenging environments, with external antennas
● AIR-AP3802e-
x-K9: Dual-band controller-based 802.11a/b/g/n/ac
● AIR-AP3802e-
xK910: Eco-pack (dual-band 802.11a/b/g/n/ac), 10 quantity access points
Cisco Aironet 3800e Access Point Configurable: Indoor, challenging environments, with external antennas
● AIR-AP3802E-
x-K9C: Dual-band controller-based 802.11a/g/n/ac, configurable
● AIR-AP3802E-
xK910C: Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points, configurable
Cisco Aironet 3800p Access Point: Indoor, challenging environments, with external antennas
● AIR-AP3802p-
x-K9: Dual-band controller-based 802.11a/b/g/n/ac
● AIR-AP3802p-
xK910: Eco-pack (dual-band 802.11a/b/g/n/ac), 10 quantity access points
Cisco Aironet 3800p Access Point Configurable: Indoor, challenging environments, with external antennas
● AIR-AP3802p-
x-K9C: Dual-band controller-based 802.11a/g/n/ac, configurable
● AIR-AP3802p-
xK910C: Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points, configurable
Cisco Smart Net Total Care® for the Cisco Aironet 3800i Access Point with internal antennas
● CON-SNT-AIRPIBK9: SNTC-8X5XNBD 802.11ac Ctrlr AP 4x Duration: 12 Month(s)
Cisco Smart Net Total Care for the Cisco Aironet 3800e Access Point with external antennas
● CON-SNT-AIRPID38E: SNTC-8X5XNBD 802.11ac Ctrlr AP 4x4:3SS w/ CleanAir; Ex Duration: 12 Month(s)
Cisco Smart Net Total Care for the Cisco Aironet 3800p Access Point with external antennas
● CON-SNT-AIRAP382: SNTC-8X5XNBD 802.11ac Ctrlr AP 4x Duration: 12 Month(s)
Regulatory domains: (x = regulatory domain) Customers are responsible for verifying approval for use in their individual countries. To verify approval, and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List. Cisco Smart Net Total Care Service: https://www.cisco.com/go/sntc Cisco Wireless LAN Services
● AS-WLAN-CNSLT:
Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT:
Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT:
Cisco Wireless LAN Performance and Security Assessment Service
|
||||||
| Software and supported wireless LAN controllers |
● Cisco Unified Wireless Network Software Release 8.2.111.0 or later
● Cisco IOS
® XE Software Release 16.3
● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst
® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex
® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 Series Wireless Controllers, Cisco Virtual Wireless Controller
● Cisco Catalyst 3850 Series and 3650 Series Switches
● Cisco Mobility Express
|
||||||
| 802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with three spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
|
||||||
| 802.11ac Wave 1 capabilities |
● 4x4 MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
|
||||||
| 802.11ac Wave 2 capabilities |
● 4x4 MU-MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80, 160-MHz channels
● PHY data rates up to 5.2 Gbps
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
|
||||||
| Wi-Fi Alliance Certified |
● Wi-Fi Certified a, b, g, n, ac
● Wi-Fi Vantage
● WMM
● Passpoint
|
||||||
| Integrated antenna |
Flexible radio (either 2.4 GHz or 5 GHz)
● 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
● 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
|
||||||
| External antenna (sold separately) |
● 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● 3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the
AIR‑ANT2513-P4M-N= antenna
● Cisco offers the industry's broadest selection of
antennas, delivering optimal coverage for a variety of deployment scenarios
|
||||||
| Smart antenna connector |
● Available on the 3802e Series and 3802p Series access points only
● Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
● Required when running the flexible radio as either a:
◦ Second 5-GHz serving radio
◦ Wireless Security Monitoring radio
|
||||||
| Interfaces |
● 2 Ethernet ports
● 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
◦ CAT 5e cabling
◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling
● 100/1000BASE-T autosensing (RJ-45 - AUX port)
● Management console port (RJ-45)
|
||||||
| Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
||||||
| Dimensions (W x L x H) |
● Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)
|
||||||
| Weight |
● 4.6 lb (2.09 kg)
|
||||||
| Input power requirements |
● 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE
®)
● 802.3at power injector (AIR-PWRINJ6=)
● 50W power supply (AIR-PWR-50=)
|
||||||
| Power draw |
● 25.8W at the PSE (22.5W at the PD) with all features enabled except for the USB 2.0 port
● 30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled
|
||||||
| Environmental |
Cisco Aironet 3800i
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% percent (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3800e
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 3800p
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
|
||||||
| System memory |
● 1024 MB DRAM
● 256 MB flash
|
||||||
| Available transmit power settings |
2.4 GHz
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
|
5 GHz
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
|
|||||
| Frequency band and 20-MHz operating channels |
A (A regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
B (B regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.720 GHz; 12 channels
● 5.745 to 5.825 GHz; 5 channels
C (C regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.745 to 5.825 GHz; 5 channels
D (D regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
E (E regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz) F (F regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.250 to 5.350 GHz; 4 channels
● 5.725 to 5.825 GHz; 4 channels
G (G regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.745 to 5.825 GHz; 5 channels
H (H regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.150 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
|
I (I regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
K (K regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.620 GHz; 7 channels
● 5.745 to 5.805 GHz; 4 channels
N (N regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
Q (Q regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 11 channels
R (R regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.660 to 5.700 GHz; 3 channels
● 5.745 to 5.805 GHZ; 4 channels
S (S regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz;, 11 channels
● 5.745 to 5.825 GHz; 5 channels
T (T regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.280 to 5.320 GHz; 3 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
Z (Z regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
|
|||||
| Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance. |
|||||||
| Maximum number of nonoverlapping channels |
2.4 GHz
● 802.11b/g:
◦ 20 MHz: 3
● 802.11n:
◦ 20 MHz: 3
|
5 GHz
● 802.11a:
◦ 20 MHz: 25 FCC, 16 EU
● 802.11n:
◦ 20 MHz: 25 FCC, 16 EU
◦ 40 MHz: 12 FCC, 7 EU
● 802.11ac:
◦ 20 MHz: 25 FCC, 16 EU
◦ 40 MHz: 12 FCC, 7 EU
◦ 80 MHz: 6 FCC, 3 EU
◦ 160 MHz 2 FCC, 1 EU
|
|||||
| Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain. |
|||||||
| Compliance standards |
◦ UL 60950-1 ◦ CAN/CSA-C22.2 No. 60950-1 ◦ UL 2043 ◦ IEC 60950-1 ◦ EN 60950-1 ◦ EN 50155 for 3800e (Operating temperature -20° to 50°C)
● Radio approvals:
◦ FCC Part 15.107, 15.109, 15.247, 15.407, 14-30 ◦ RSS-247 (Canada) ◦ EN 300.328, EN 301.893 (Europe) ◦ ARIB-STD 66 (Japan) ◦ ARIB-STD T71 (Japan) ◦ EMI and susceptibility (Class B) ◦ ICES-003 (Canada) ◦ VCCI (Japan) ◦ EN 301.489-1 and -17 (Europe) ◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
● IEEE standards:
◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, 802.11r, 802.11k, 802.11v, 802,11u, 802.11w ◦ IEEE 802.11ac
● Security:
◦ 802.11i, Wi-Fi Protected Access 3 (WPA3), WPA2, WPA ◦ 802.1X ◦ Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
● Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) ◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2 ◦ EAP-Flexible Authentication via Secure Tunneling (FAST) ◦ PEAP v1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM)
● Multimedia:
◦ Wi-Fi Multimedia (WMM)
● Other:
◦ FCC Bulletin OET-65C ◦ RSS-102 |
||||||
| Warranty |
Limited lifetime hardware warranty |
||||||
| Data rates supported |
802.11b: 1, 2, 5.5, and 11 Mbps |
||||||
| 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps |
|||||||
| 802.11n HT20: 6.5 to 216.7 Mbps (MCS0 to MCS23) |
|||||||
| 802.11n HT40: 13.5 to 450 Mbps (MCS0 to MCS23) |
|||||||
| 802.11ac VHT20: 6.5 to 288.9 Mbps (MCS0 to 8 – SS 1, MCS0 to 9 – SS 2 and 3) |
|||||||
| 802.11ac VHT40: 13.5 to 600 Mbps (MCS0 to 9 – SS 1 to 3) |
|||||||
| 802.11ac VHT80: 29.3 to 1300 Mbps (MCS0 to 9 – SS 1 to 3) |
|||||||
| 802.11ac VHT160: 58.5 to 2304 Mbps (MCS0 to 9 – SS 1 and 2, MCS0 to 8 – SS 3) |
|||||||
| Transmit power and receive sensitivity |
|||||||
|
|
|
5-GHz radio |
2.4-GHz flexible radio |
5-GHz flexible radio |
|||
|
|
Spatial streams |
Total Tx power (dBm) |
Rx sensitivity (dBm) |
Total Tx power (dBm) |
Rx sensitivity (dBm) |
Total Tx power (dBm) |
Rx sensitivity (dBm) |
| 802.11/11b |
|||||||
| 1 Mbps |
1 |
NA |
NA |
23 |
-101 |
NA |
NA |
| 11 Mbps |
1 |
NA |
NA |
23 |
-88 |
NA |
NA |
| 802.11a/g |
|||||||
| 6 Mbps |
1 |
23 |
-93 |
23 |
-91 |
23 |
-92 |
| 24 Mbps |
1 |
23 |
-89 |
23 |
-87 |
23 |
-89 |
| 54 Mbps |
1 |
23 |
-81 |
23 |
-77 |
22 |
-80 |
| 802.11n HT20 |
|||||||
| MCS0 |
1 |
23 |
-93 |
23 |
-91 |
23 |
-93 |
| MCS4 |
1 |
23 |
-88 |
23 |
-86 |
23 |
-87 |
| MCS7 |
1 |
23 |
-79 |
23 |
-77 |
22 |
-78 |
| MCS8 |
2 |
23 |
-93 |
23 |
-91 |
21 |
-93 |
| MCS12 |
2 |
23 |
-86 |
23 |
-85 |
23 |
-86 |
| MCS15 |
2 |
23 |
-79 |
23 |
-77 |
21 |
-78 |
| MCS16 |
3 |
23 |
-93 |
23 |
-91 |
23 |
-92 |
| MCS20 |
3 |
23 |
-85 |
23 |
-84 |
22 |
-84 |
| MCS23 |
3 |
23 |
-78 |
23 |
-76 |
18 |
-77 |
| 802.11n HT40 |
|||||||
| MCS0 |
1 |
23 |
-90 |
|
|
23 |
-89 |
| MCS4 |
1 |
23 |
-85 |
|
|
23 |
-84 |
| MCS7 |
1 |
23 |
-76 |
|
|
23 |
-75 |
| MCS8 |
2 |
23 |
-90 |
|
|
23 |
-89 |
| MCS12 |
2 |
23 |
-83 |
|
|
23 |
-83 |
| MCS15 |
2 |
23 |
-76 |
|
|
21 |
-76 |
| MCS16 |
3 |
23 |
-90 |
|
|
23 |
-89 |
| MCS20 |
3 |
23 |
-82 |
|
|
23 |
-81 |
| MCS23 |
3 |
23 |
-75 |
|
|
20 |
-74 |
| 802.11ac VHT20 |
|||||||
| MCS0 |
1 |
23 |
-93 |
|
|
23 |
-92 |
| MCS4 |
1 |
23 |
-88 |
|
|
23 |
-87 |
| MCS7 |
1 |
23 |
-82 |
|
|
22 |
-80 |
| MCS8 |
1 |
23 |
-77 |
|
|
21 |
-75 |
| MCS0 |
2 |
23 |
-93 |
|
|
23 |
-91 |
| MCS4 |
2 |
23 |
-86 |
|
|
23 |
-84 |
| MCS7 |
2 |
23 |
-79 |
|
|
21 |
-77 |
| MCS8 |
2 |
23 |
-75 |
|
|
20 |
-73 |
| MCS9 |
2 |
NA |
NA |
|
|
NA |
NA |
| MCS0 |
3 |
23 |
-93 |
|
|
23 |
-91 |
| MCS4 |
3 |
23 |
-85 |
|
|
22 |
-83 |
| MCS7 |
3 |
23 |
-78 |
|
|
20 |
-76 |
| MCS8 |
3 |
23 |
-74 |
|
|
19 |
-72 |
| MCS9 |
3 |
23 |
-72 |
|
|
18 |
-70 |
| 802.11ac VHT40 |
|||||||
| MCS0 |
1 |
23 |
-90 |
|
|
23 |
-89 |
| MCS4 |
1 |
23 |
-85 |
|
|
23 |
-84 |
| MCS7 |
1 |
23 |
-78 |
|
|
22 |
-77 |
| MCS8 |
1 |
23 |
-75 |
|
|
21 |
-73 |
| MCS9 |
1 |
23 |
-73 |
|
|
20 |
-72 |
| MCS0 |
2 |
23 |
-90 |
|
|
23 |
-89 |
| MCS4 |
2 |
23 |
-83 |
|
|
23 |
-82 |
| MCS7 |
2 |
23 |
-76 |
|
|
21 |
-75 |
| MCS8 |
2 |
23 |
-73 |
|
|
20 |
-72 |
| MCS9 |
2 |
23 |
-71 |
|
|
19 |
-69 |
| MCS0 |
3 |
23 |
-90 |
|
|
23 |
-89 |
| MCS4 |
3 |
23 |
-82 |
|
|
23 |
-80 |
| MCS7 |
3 |
23 |
-74 |
|
|
20 |
-73 |
| MCS8 |
3 |
23 |
-70 |
|
|
19 |
-68 |
| MCS9 |
3 |
23 |
-69 |
|
|
18 |
-67 |
| 802.11ac VHT80 |
|||||||
| MCS0 |
1 |
23 |
-87 |
|
|
23 |
-86 |
| MCS4 |
1 |
23 |
-83 |
|
|
23 |
-81 |
| MCS7 |
1 |
23 |
-76 |
|
|
22 |
-74 |
| MCS8 |
1 |
23 |
-72 |
|
|
21 |
-70 |
| MCS9 |
1 |
23 |
-69 |
|
|
20 |
-68 |
| MCS0 |
2 |
23 |
-87 |
|
|
23 |
-86 |
| MCS4 |
2 |
23 |
-80 |
|
|
23 |
-79 |
| MCS7 |
2 |
23 |
-73 |
|
|
21 |
-72 |
| MCS8 |
2 |
23 |
-69 |
|
|
20 |
-68 |
| MCS9 |
2 |
23 |
-67 |
|
|
19 |
-66 |
| MCS0 |
3 |
23 |
-87 |
|
|
23 |
-86 |
| MCS4 |
3 |
23 |
-77 |
|
|
23 |
-77 |
| MCS7 |
3 |
23 |
-72 |
|
|
20 |
-70 |
| MCS8 |
3 |
23 |
-67 |
|
|
19 |
-66 |
| MCS9 |
3 |
22 |
-65 |
|
|
18 |
-64 |
| 802.11ac VHT160 |
|||||||
| MCS0 |
1 |
23 |
-83 |
|
|
23 |
-83 |
| MCS4 |
1 |
23 |
-78 |
|
|
23 |
-78 |
| MCS7 |
1 |
23 |
-71 |
|
|
22 |
-71 |
| MCS8 |
1 |
23 |
-67 |
|
|
21 |
-68 |
| MCS9 |
1 |
23 |
-66 |
|
|
20 |
-66 |
| MCS0 |
2 |
23 |
-83 |
|
|
23 |
-83 |
| MCS4 |
2 |
23 |
-76 |
|
|
23 |
-76 |
| MCS7 |
2 |
23 |
-69 |
|
|
21 |
-69 |
| MCS8 |
2 |
23 |
-65 |
|
|
20 |
-66 |
| MCS9 |
2 |
23 |
-63 |
|
|
19 |
-63 |
| MCS0 |
3 |
23 |
-82 |
|
|
23 |
-83 |
| MCS4 |
3 |
23 |
-74 |
|
|
22 |
-74 |
| MCS7 |
3 |
23 |
-67 |
|
|
20 |
-68 |
| MCS8 |
3 |
23 |
-62 |
|
|
19 |
-62 |
In order to connect any access points to the controller, Cisco DNA software subscriptions are required. To be entitled to connect to a Cisco Catalyst 9800 Series Wireless Controller, the access point requires a Cisco DNA subscription license.
Access points connecting to a Cisco Catalyst 9800 Series controller have new and simplified software subscription packages.
They can support both tiers of Cisco DNA software: Cisco DNA Essentials and Cisco DNA Advantage.
Cisco DNA software subscriptions provide Cisco innovations on the access point. They also include perpetual Network Essentials and Network Advantage licensing options, which cover wireless fundamentals such as 802.1X authentication, Quality of Service (QoS), and Plug and Play (PnP); telemetry and visibility; and Single Sign-On (SSO), as well as security controls.
Cisco DNA subscription software has to be purchased for a 3-, 5-, or 7-year subscription term. If not renewed by the end of the term, Cisco DNA features will expire, whereas Network Essentials and Network Advantage features will remain.
For the full feature list of Cisco DNA Software, including the perpetual Network Essentials and Network Advantage, please see the feature matrix:
Two modes of licensing are available:
● Smart Licensing (SL) simplifies and adds flexibility to licensing. It is:
◦ Simple: Procure, deploy, and manage licenses easily. Devices self-register, removing the need for Product Activation Keys (PAKs).
◦ Flexible: Pool license entitlements in a single account. Move licenses freely through the network, wherever you need them.
◦ Smart: Manage your license deployments with real-time visibility into ownership and consumption.
● Specific License Reservation (SLR) is a feature used in highly secure networks. It provides a method for customers to deploy a software license on a device (product instance) without communicating usage information to Cisco. There is no communication with Cisco or a satellite. The licenses are reserved for every controller. It is node-based licensing.
Four levels of license are supported on the Cisco Catalyst 9800 Series Wireless Controllers. The controllers can be configured to function at any one of the four levels.
● Cisco DNA Essentials: At this level the Cisco DNA Essentials feature set will be supported.
● Cisco DNA Advantage: At this level the Cisco DNA Advantage feature set will be supported.
● NE: At this level the Network Essentials feature set will be supported.
● NA: At this level the Network Advantage feature set will be supported.
For customers who purchase Cisco DNA Essentials, Network Essentials will be supported and will continue to function even after term expiration. And for customers who purchase Cisco DNA Advantage, Network Advantage will be supported and will continue to function even after term expiration.
Initial bootup of the controller will be at the Cisco DNA Advantage level.
For questions, contact the Cisco Catalyst 9800 Series Wireless Controllers Licensing mailer group at ask-catalyst9800licensing
The Cisco Aironet 3800 Series Access Points come with a limited lifetime warranty that provides full warranty coverage of the hardware for as long as the original end user continues to own or use the product. The warranty includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days. For more details, visit https://www.cisco.com/go/warranty.
Cisco environmental sustainability
Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report.
Reference links to information about key environmental sustainability topics (mentioned in the “Environment Sustainability” section of the CSR Report) are provided in the following table:
| Sustainability topic |
Reference |
| Information on product material content laws and regulations |
|
| Information on electronic waste laws and regulations, including products, batteries, and packaging |
|
| Sustainability inquiries |
Contact: csr_inquiries@cisco.com |
Cisco makes the packaging data available for informational purposes only. It may not reflect the most current legal developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This information is subject to change without notice.
Flexible payment solutions to help you achieve your objectives
Cisco Capital® makes it easier to get the right technology to achieve your objectives, enable business transformation, and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.
